Characteristics: The measure range is specialized designed for the hydropower plant. Under the wide range, the dead zone is less than 0.1Mpa. With lock nut, the setting can be kept stable. As there are wire converted terminals, it's easy and convenient for wiring. The performance is stable.

Profile:  

PSP13 split and double values pressure switch is widely used for the water, gas and oil’s pressure control. When the

pressure is higher than the setting value, the pressure will make the constant spring deformation, which makes the

micro switch action and export contact signal (only can be set a setting value), thus realize alarm and control.

The split and double values type pressure switch is composed by two single-valued switches, it can export double
values. It is suitable for the occasions which the mounting interface is limited and it is necessary to control two different pressure.

The main technical parameters

Characteristic index