Characteristics: It can work in different and extensive pressure. Good anti-jamming ability. More precise with permanent magnet. The sensor parts adopt the designation of integrated module: stable and reliable.  High-resolution: as high as 5mm.

Profile: LTF21 Split-type Magnetic Inductive Level Transmitter's measurement part and transmission part is  connected by the cable, flexible for installation: suitable for narrow space or the circumstance where it can't observe the values and wire after installation. In process of measurement, the ball built-in magnetic bundle unit shall move along a sensor made up of a serial of magnetic modules, under action of the magnetic unit, the magnetic module inside the sensor shall make counter point action, output a changed resistor signal, and then transfer the signal into a corresponding current output signal of 4~20mA.

Technical Parameter
Measurement Range: 0~3000mm

Length of cable: 0-3000mm
Rated Pressure: 0~1MPa If over 1MPa, please remark when ordering.
Measurement Accuracy:±5mm
Temperature Effect: ≤±0.1%FS/year
Long-term Stability: ≤±0.2%FS/year
Operating Voltage: 12Vdc~30Vdc
Max. Power Loss: 1 W
Output Current: 4~20mA
Load Impedance:  ≤750Ω (24Vdc)
Insulation Impedance:   ≥100MΩ (100Vdc)
Wiring Mode: 5-core M12*1 aviation socket
Ambient Condition: -40～80℃, ≤95%RH, avoid strong corrosive gas
EMC Immunity
IEC 61000-4-2:2001:Electrostatic Discharge Immunity Test  Class 3
IEC 61000-4-3:2002: Radiated, Radio-frequency, Electromagnetic Field Immunity Test. Class 3
IEC 61000-4-4:2004: Electrical Fast Transient Immunity Test, Class 3
IEC 61000-4-5:2005: Surge Immunity Test, Class 3